The Biggest Marine Webstore Around The Baltic Sea
Cart is empty
Menu Categories
Search:
Sulge

Contact

Contact

MOTORBOATING AND MOTOR ACCESSORIES

CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 9 x 12"
Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 9 x 12" (23 x 30,5 cm), Minimum transom height: 13,5" (34,3 cm), suitable for boats 16'- 25' (4,9 m -7,6 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !
M19040722
Price: 799.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 12 x 9"
Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 12 x 9" (30,5 x 23 cm), Minimum transom height: 11" (27,9 cm), suitable for boats 14'- 18' (4,2 m -5,4 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !
M19040724
Price: 834.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 12 x 12"
Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 12 x 12" (30,5 x 30,5 cm), Minimum transom height: 11" (27,9 cm), suitable for boats 17'- 30' (5,2 m -9,1 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !
M19040726
Price: 863.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 2,78 mm, 12 x 18"
Edge mount Lenco trim tab kit, 12-Gauge Blades / 12-Volt Actuators. Dimensions: 12 x 18" (30,5 x 46 cm), Minimum transom height: 11" (27,9 cm), suitable for boats 26'- 36' (7,9 m -10,9 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 12 GA (2,78 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !
M19040728
Price: 937.00 €
STANDAR...
STANDARD SWITCH KIT (SINGLE)- LENCO, 12 V

Lenco Trim Tab Standard Tactile Switch Kit, 12 V, vith Built-In Retractor For Single Actuator System. Maintenance-free, and easy-to-install tactile switches. The switch itself is completely waterproof and has an over-molded connector to eliminate water intrusion. The standard tactile switch is built to all the same exacting standards as the indicator switches. Kit Contents: Key Pad; Control Box; 90 cm Power Pigtail (plug and play).

M19040766
Price: 249.00 €
LED INT...
LED INTEGRATED SWITCH KIT- LENCO, 12/24 V

Led indicators, 12 / 24 V for Single Actuator System. Led indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Features Include: Simple, quick, Plug & Play installation; Instant response. Built-in retractor; Low profile design; Self-contained key pad with waterproof Plug & Play Deutsch connectors; Wiring harness length 76,2 cm from the back of the switch bezel; 90 cm power pigtail.

M19040764
Price: 473.00 €
AUTO GL...
AUTO GLIDE BOAT CONTROL SYSTEM- LENCO
Real automatic boat and trim tab control system. The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again. The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up process after the installation of your Auto Glide system. Imagine that your boat’s running angle is measured 25 times per second and this data is used by the new Auto Glide control box to: * Automatically put your boat in the most efficient running angle. * Reduce the amount of bow rise of your boat during hole shot mode. * Eliminate bow porpoising (bow bounce). * Keep your boat level at all times. The Auto Glide Control Box (brain) consists of gyroscopes, accelerometers, and new, very sophisticated, and patented software.
M19040750
Price: 1549.00 €
FLYBRID...
FLYBRIDGE KIT FOR STANDARD INTEGRATED KIT- LENCO, 6 m
Second station Standard Key Pad, 12 / 24 V, Single Actuator System. Add a second station key pad to your new Integrated Tactile Switch by plugging into the existing harness. Kit Include: Harness in length 6 m; second station key pad.
M19040787
Price: 201.00 €
FLYBRID...
FLYBRIDGE KIT FOR STANDARD INTEGRATED KIT- LENCO, 9 m
Second station Standard Key Pad, 12 / 24 V, Single Actuator System. Add a second station key pad to your new Integrated Tactile Switch by plugging into the existing harness. Kit Include: Harness in length 9 m; second station key pad.
M19040788
Price: 222.00 €
ELECTRI...
ELECTRIC TRIM TAB KIT- ULTRAFLEX UFLEX, BLACK / CHROMED
Uflex- Electric Trim Tab Kit, black, 12 V. Electric trim tab kit for a smooth flap control. The kit is specifically designed for demanding conditions at sea and consists of two electric adjusting cylinders and a control panel with joystick. The system requires no maintenance since the actuating cylinders are sealed completely (waterproof to IP68). Kit content: 2 x black adjusting cylinder: 301 mm length (when fully retracted); 1 x chromed Easy-joystick.
M19040900
Price: 1025.00 €
ELECTRI...
ELECTRIC TRIM TAB KIT- ULTRAFLEX UFLEX, BLACK / BLACK
Uflex- Electric Trim Tab Kit, black, 12 V. Electric trim tab kit for a smooth flap control. The kit is specifically designed for demanding conditions at sea and consists of two electric adjusting cylinders and a control panel with joystick. The system requires no maintenance since the actuating cylinders are sealed completely (waterproof to IP68). Kit content: 2 x black adjusting cylinder: 301 mm length (when fully retracted); 1 x black Easy-joystick.
M19040903
Price: 1025.00 €
POLISHE...
POLISHED TABS- ULTRAFLEX, 9 x 9"
Stainless steel, mirror electro-polished trim tab blades. No need for new holes in case of Lenco® or Bennett® same size replacements. Weight per pair: 2,8 kg; Size: 9" x 9" (229 mm x 229 mm); Transom min. height: 33.06 cm (13.01”); Suitable boat: from 4,5 to 5,5 m (14’ - 18’). NOT DESIGNED FOR USE IN RACING APPLICATIONS!
M19040910
Price: 143.00 €
POLISHE...
POLISHED TABS- ULTRAFLEX, 12 x 9"
Stainless steel, mirror electro-polished trim tab blades. No need for new holes in case of Lenco® or Bennett® same size replacements. Weight per pair: 3,6 kg; Size: 12" x 9" (305 x 229 mm); Transom min. height: 33.06 cm (13.01”); Suitable boat: from 5,0 to 8,0 m (15’ - 22’). NOT DESIGNED FOR USE IN RACING APPLICATIONS!
M19040912
Price: 154.00 €
POLISHE...
POLISHED TABS- ULTRAFLEX, 12 x 12"
Stainless steel, mirror electro-polished trim tab blades. No need for new holes in case of Lenco® or Bennett® same size replacements. Weight per pair: 4,6 kg; Size: 12" x 12" (305 x 305 mm); Transom min. height: 33.06 cm (13.01”); Suitable boat: from 5,5 to 9,0 m (18’ - 30’). NOT DESIGNED FOR USE IN RACING APPLICATIONS!
M19040914
Price: 215.00 €
POLISHE...
POLISHED TABS- ULTRAFLEX, 12 x 18"
Stainless steel, mirror electro-polished trim tab blades. No need for new holes in case of Lenco® or Bennett® same size replacements. Weight per pair: 6,7 kg; Size: 12" x 18" (305 x 457 mm); Transom min. height: 33.06 cm (13.01”); Suitable boat: from 8,0 to 11,0 m (26’ - 36’). NOT DESIGNED FOR USE IN RACING APPLICATIONS!
M19040916
Price: 273.00 €
CONTROL...
CONTROL JOYSTICK- ULTRAFLEX, 70 mm
Ultraflex main station compact control unit with joystick. Auto-line up function included (automatic flap re-alignment). 0.50 m wiring harness; 70 mm hole size.
M19040930
Price: 225.00 €
PROPELL...
PROPELLER GUARD, 8,5" (21,59 cm)
Propeller guard is made out of a light weight but strong, high impact, flexible injection molded plastic. In addition to protect, it controlls water flow which gives the boat improved handling and more power. Dimensions: Propeller diameter 8,5” (21,59 cm). For engines 10 – 20 HP. Colour: Yellow.
LMAD094
Price: 232.00 €
PROPELL...
PROPELLER GUARD, 10,5" (26,67 cm)
Propeller guard is made out of a light weight but strong, high impact, flexible injection molded plastic. In addition to protect, it controlls water flow which gives the boat improved handling and more power. Dimensions: Propeller diameter 10,5” (26,67 cm). For engines 25 – 35 HP. Colour: Orange.
LMAD115
Price: 257.00 €
PROPELL...
PROPELLER GUARD, 12,5" (31,75 cm)
Propeller guard is made out of a light weight but strong, high impact, flexible injection molded plastic. In addition to protect, it controlls water flow which gives the boat improved handling and more power. Dimensions: Propeller diameter 12,5” (31,75 cm). For engines 40 – 65 HP. Colour: Blue.
LMAD132
Price: 293.00 €
PROPELL...
PROPELLER GUARD, 13,5" (34,29 cm)
Propeller guard is made out of a light weight but strong, high impact, flexible injection molded plastic. In addition to protect, it controlls water flow which gives the boat improved handling and more power. Dimensions: Propeller diameter 13,5” (34,29 cm). For engines 70 – 100 HP. Colour: Red.
LMAD146
Price: 306.00 €
PROPELL...
PROPELLER GUARD, 15,5" (39,37 cm)
Propeller guard is made out of a light weight but strong, high impact, flexible injection molded plastic. In addition to protect, it controlls water flow which gives the boat improved handling and more power. Dimensions: Propeller diameter 15,5” (39,37 cm). For engines 110 – 350 HP. Colour: Black.
LMAD169
Price: 365.00 €
DROP-DO...
DROP-DOWN OUTBOARD BRACKETS, up to 8 HP
Bracket for auxiliary engine, made of mirror polished stainless steel. Drop-down system with intermediate adjustment with a comfortable handle. Brackets are fitted with the latest high-resistant boards. Up to 8 HP or 30 kg, Base: 110 x 150 mm. Board: 190 x 260 mm.
47.376.11
Price: 129.87 €
DROP-DO...
DROP-DOWN OUTBOARD BRACKETS, up to 15 HP
Bracket for auxiliary engine, made of polished stainless steel, mirror polished, with high resistance plastic board. Adjustable handle. Up to 15 HP or 40 kg, Base: 140 x 150 mm, Board: 190 x 260 mm.
47.376.10
Price: 147.91 €
DROP-DO...
DROP-DOWN OUTBOARD BRACKETS, up to 20 HP
Bracket for auxiliary engine, made of polished stainless steel, mirror polished, with high resistance plastic board. Up to 20 HP or 45 kg, Base: 140 x 150, Board: 250 x 260 mm.
47.376.26
Price: 193.12 €
DROP-DO...
DROP-DOWN OUTBOARD BRACKETS, up to 7 HP
Bracket for auxiliary engine, made of polished stainless steel, mirror polished, with high resistance plastic board. Up to max 7 HP or 25 kg. Fixing board: 110 x 140 mm.
47.376.12
Price: 113.71 €
HEAVY D...
HEAVY DUTY ENGINE SUPPORT, up to 45 HP
Heavy duty engine support for wall mounting. Can support engines up to 45 horsepower.
47.385.00
Price: 93.73 €
EXTENSI...
EXTENSION HANDLE, 60 cm
Extension handle for outboard motors with release lock. Made of anodized light alloy with rubber grip and nylon locking. Suitable for all outboard engines. Length: 60 cm.
45.155.80
Price: 13.01 €
EXTENSI...
EXTENSION HANDLE, 61-100 cm

Telescopic extension handle for outboard motors with snap shut system. Lenght: 61-100 cm.

45.155.86
Price: 17.93 €
OUTBOAR...
OUTBOARD ENGINE CARRIER, 90 cm x 310 mm
Fitted with wheels and 22 mm zinc plated steel tank bracket, evaporated beech polyurethane lacquered board. For engines 2T up to 35 HP or 4T up to 15 HP.
47.373.00
Price: 131.47 €
OUTBOAR...
OUTBOARD ENGINE CARRIER, 100 cm x 430 mm
Fitted with wheels and zinc plated steel tank bracket, evaporated beech polyurethane lacquered board. For engines 2T up to 60 HP or 4T up to 40 HP.
47.373.02
Price: 139.17 €
 
1  2  3  4  5  6  7
 
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
Pro Marine VDO Spinera Kenko Akzo Nobel Atwood Unimer Casio

Join us on social media