Hand Pumps, Foot Pumps, Bailers
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
HAND PUMP- WHALE MKV, 75 l/min
Hand pump Whale MKV. Fitted with stainless steel removable handle, neoprene diaphragm, immediate inspection from the inside through the snap-on cover; can suction any type of liquid, including diesel fuel. Specific for mounting behind the bulkhead (with watertight trap door). Max capacity: 75 l/min. Hose adaptor: 38 mm.
15.268.03
HAND PUMP- WHALE MK3 GUSHER URCHIN, 37 l/min
Whale hand bilge pump Gusher Urchin MK3. Handle type: removable + Trapdoor. Max. Flow: 37 l/m. Hose adaptor: 25/38 mm.
15.262.36
HAND PUMP- WHALE GUSHER URCHIN, 37 l/min
Whale hand bilge pump Gusher Urchin is obligatory on all boats in category A and B, in accordance with current EU standards. High quality product, made with the best materials on the market. Handle type: removable. Max. flow: 37 l/m. Hose adaptor: 25/38 mm.
15.262.34
HAND PUMP- WHALE COMPACT 50, 40 l/min
Whale Compact 50 pump. Designed for concealed installation, ideal for mounting in confined spaces, fitted with swivelling inlet and outlet jointly with a lower casing. Also suitable for transferring diesel fuel. Made of polypropylene, fiberglass and nylon 66 reinforcements. Includes handle and clip-in trap door. Depth: 127 mm. Body: 199 x 196 mm. Hose adaptor: 25 mm. Mounting with: 4 screws. Capacity: 40 l/m.
15.350.00
HAND PUMP, FOLDABLE, 22 l/min
Hand pump foldable behind the bulkhead. Fitted with locking trap door and joints for adjustable pipes on the back. Size: 177 x 192 x 204 mm. Hose adaptor: 25 mm. Capacity: 22 litres per 30 pumping cycles.
15.262.25
DIAPHRAGM HAND PUMP- OSCULATI, FIXED HANDLE
Hand diaphragm pump, made of anti-corrosion plastic, rubber and stainless steel. Pipe adapter 25 mm. Bulkhead model, fixed handle, Size: 180 x 125 x 75 mm, Capacity 0,33 litres per pumping (30 up to 60 pumping per minute).
15.262.20
SPARE SEAL KIT FOR HAND PUMP 15.262.20
Spare seal kit for hand pump 15.262.20.
15.262.21
DIAPHRAGM HAND PUMP- LALIZAS
Diaphragm bilge hand pump is ideal for use where battery power is not available or as a backup to the electric pumps. Two-position handle for convenient use depending on your position (horizontal and vertical). Capacity: 0,4 l per stroke. Outlet hoses: 3/4´´(19,05 mm) or 1´´ (25,40 mm).
L31342
Bilge pump Drainman. This pump exploits the movement of the boat generated by wind and waves, when at anchor or in a marina. It is made of stainless steel materials and it is equipped with stainless steel intake pipe and suction strainer. Max.daily capacity: 2500 l.
15.267.00
FOOT PUMP- WHALE BABY FOOT MK2
Whale Baby Foot MK2 foot pump is made in nylon, Neoprene and stainless steel. Capacity: 8 l/min. Hose pipe: 13 mm. Width: 140 mm.
15.461.80
SINK FOOT-PUMP, 2-WAYS, 9 l/min
Sink double-acting foot pump. Swivelling inlet/outlets, neoprene diaphragm, nylon body. Hose adaptor: 14,5 mm. Max.capacity: 9 l/min.
15.253.00
FOOT PUMP- WHALE GUSHER MK3, 16 l/min
Whale Gusher MK3 foot pump has adjustable hose connector, 3 possible mounting positions, self-priming features. Capacity: 16 l/min. Hose adaptor: 15 mm.
15.550.00
Hand pump Ponabocus complete with extension and hose. Length: 35 cm, Hose diameter: 50 mm.
15.263.35
Hand pump Ponabocus complete with extension and hose. Length: 55 cm, Hose diameter: 50 mm.
15.263.55
Hand pump equipped with 95-cm drain tube. Ergonomic grip handle. Length: 100 cm, Hose diameter: 44 mm.
15.265.03
Manual double-acting bilge pump. Fitted with central soft sleeve for better intake. Drain hose: 100 cm, Length: 53 cm.
15.263.00
Lalizas coop bailer, 2,5 l. Size: 158 x 128 x 215 mm.
L11919
Bailer made in Eltex. Designed for bailing and transferring fuel.
15.801.03
Bailer made in Eltex. Fuel resistant. Size: 410 x 220 mm.
15.801.02
Bailer made in Eltex. Fuel resistant. Size: 360 x 110 mm.
15.801.01
SERVICE KIT FOR LALIZAS 31342 HAND PUMP
Service kit for hand bilge pump Lalizas 31342 (includes diaphragm, flapper valves, gasket).
L31399
REPAIR KIT FOR URCHIN PUMPS
Repair kit for Urchin pumps.
15.262.37
SERVICE KIT FOR WHALE PUMPS, AK8050
Spare gasket kit for Whale pumps.
15.268.04
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT