Accessories for Inflatable Boats
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
REPAIR KIT FOR PVC BOATS, BLACK
Kit for PVC inflatables contains: 125 grams glue, PVC cleaning product, 2 patches 14 x 21 cm, brush, activator and user instructions.
66.234.01
REPAIR KIT FOR PVC BOATS, GREY
Kit for PVC inflatables contains: 125 grams glue, PVC cleaning product, 2 patches 14 x 21 cm, brush, activator and user instructions.
66.234.00
REPAIR KIT FOR NEOPRENE BOATS, BLACK
Kit for Neoprene inflatables contains: 125 grams glue with catalizer, 2 Neoprene patches 15 x 22 cm, brush, sand paper and user instructions.
66.235.01
REPAIR KIT FOR NEOPRENE BOATS, GREY
Kit for Neoprene inflatables contains: 125 grams glue with catalizer, 2 Neoprene patches 15 x 22 cm, brush, sand paper and user instructions.
66.235.00
Universal glue "Desmacoll" is intended for the repair the products are made of PVC fabric (inflatable boats, trampolines, awnings), fastening the shoe soles, repair the leather products. Transparent. Directions for use: surfaces should degreased with acetone or gasoline, apply a layer of glue, hold for 2-3 minutes, apply a layer of glue a second time and hold for 3-5 minutes, then press the glued surfaces tightly, or roll with a roller. Recommended drying time is 24 hours.
PM-DESMAK-40
Universal glue "Desmacoll" is intended for the repair the products are made of PVC fabric (inflatable boats, trampolines, awnings), fastening the shoe soles, repair the leather products. Transparent. Directions for use: surfaces should degreased with acetone or gasoline, apply a layer of glue, hold for 2-3 minutes, apply a layer of glue a second time and hold for 3-5 minutes, then press the glued surfaces tightly, or roll with a roller. Recommended drying time is 24 hours.
PM-DESMAK-330
Universal glue "Desmacoll" is intended for the repair the products are made of PVC fabric (inflatable boats, trampolines, awnings), fastening the shoe soles, repair the leather products. Transparent. Directions for use: surfaces should degreased with acetone or gasoline, apply a layer of glue, hold for 2-3 minutes, apply a layer of glue a second time and hold for 3-5 minutes, then press the glued surfaces tightly, or roll with a roller. Recommended drying time is 24 hours.
PM-DESMAK-600
GLUE FOR PVC, TWO-COMPONENT, 125 g
Adeprene two-components glue. It's the most appreciated glue by dinghy producers. Activator: 10 ml.
66.240.51
GLUE FOR PVC, TWO-COMPONENT, 500 g
Adeprene two-components glue. It's the most appreciated glue by dinghy producers. Activator: 30 ml.
66.240.60
GLUE FOR PVC, TWO-COMPONENT, 850 g
Adeprene two-components glue. It's the most appreciated glue by dinghy producers. Activator: 50 ml.
66.240.52
Handle for inflatable boats. Dimensions: 284 x 116 mm.
66.070.28
Handle for inflatable boats. Dimensions: 90 x 280 x 65 mm.
66.080.01
OAR HOLDER FOR INFLATABLES
Oar holder for 35 mm diameter oars. Dimensions: 80 x 132 x 44 mm.
66.080.05
OARLOCK BASE FOR INFLATABLES
Oarlock base for inflatables. Dimensions: 90 x 200 x 50 mm.
66.080.15
VALVE FOR INFLATABLE BOATS
Inflating/deflating valve for inflatable boats. Universal model, PUSH-PUSH mechanism. Made of acetic resin, double seal. Screw mounted without glue. Depth: 38 mm. External diameter: 64 mm. Hole diameter: 38 mm.
66.446.64
Handle for inflatable boats. Material: EPDM. Dimensions: 300 x 120 mm.
66.070.29
EYE PLATE FOR INFLATABLES
Stainless steel D-ring with EPDM support. Diameter: 100 mm.
66.006.00
OAR HOLDER FOR INFLATABLES
Oar holder is made of EPDM. Base diameter: 110 mm.
66.005.00
TRANSOM WHEELS FOR PVC BOATS
Transom launch wheels for boats with rigid transom. They allow to move equipped boat with motor, put it afloat and ashore without track. Transom wheels are easy to set and dismantle. They can move over sandy and stony areas without difficulties and as they can be folded wheels do not hinder the boat’s motion. They are lightweight and in the same time withstand a load in 150 kg
HM-WHEELS
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT