The Biggest Marine Webstore Around The Baltic Sea
Cart is empty
Menu Categories
Search:
Sulge

Contact

Contact

New Products

CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
TV-ANTE...
TV-ANTENNA KIT, PACIFIC

TV/FM antenna with ASA plastic dome. Kit includes: coaxial cable- 10 m; interface cable for TV and antenna amplifier- 2 m; mast/wall, rail and universal mount made of AISI 316 stainless steel.

M14600860
Price: 78.80 €
VHF-ANT...
VHF-ANTENNA STAND FOR RAILS, PACIFIC, PRO-RANGE

Pacific 6113. Specifications: Description- VHF/Cellular SeaMaster Pro Series rail mount; Material- Glass filled nylon - UV inhibited; Weight- 350 g; Height- 61 mm; Base Plate Dimensions- Designed for use on 1" (25 mm) pipe; Cable and Plug- 5 m RG58AU with FastFit jack and FastFit PL259 plug.

M14600791
Price: 36.80 €
VHF-ANT...
VHF-ANTENNA STAND, PACIFIC, PRO-RANGE, ADJUSTABLE

Pacific 6111. Specifications: Description- VHF/Cellular SeaMaster Pro fold down mount; Material- Glass filled nylon - UV inhibited; Weight- 375 g; Height- 106 mm; Base Plate Dimensions- 81 x 63 mm; Hole Centres / Sizes- 61 x 43 mm. Hole diameter: 7 mm; Cable and Plug- 5 m RG58AU with FastFit Jack and FastFit PL259 plug. Use With SeaMaster Pro antennas.

M14600790
Price: 29.80 €
AM-FM-A...
AM-FM-ANTENNA STAND, PACIFIC, THROUGH-DECK MOUNT

Pacific 6116. Through deck mount, for use with SeaMaster Pro AM/FM antennas. Specifications: Description- AM/FM SeaMaster Pro Series through deck mount; Material- Glass filled nylon - UV inhibited; Weight- 335 g; Height- 27 mm; Base Plate Dimensions- diameter 35 mm; Hole Centres / Stem diametres- 16 mm; Cable and Plug 5 m RG62 with car radio plug.

M14600799
Price: 27.80 €
AM-FM-A...
AM-FM-ANTENNA STAND, PACIFIC, ADJUSTABLE

Pacific 6114. Can be used for SeaMaster Pro Series AM/FM antennas. 5 m of cable is wired into the mount. Use in side or deck mount installations . Specifications: Description- AM/FM SeaMaster Pro Series fold down mount; Material- Glass filled nylon - UV inhibited; Weight- 425 g; Height- 106 mm; Base Plate Dimensions- 81 x 63 mm; Size- 61 x 43 mm; Hole diameter- 7 mm; Cable and Plug- 5 m RG62 with car radio antenna plug.

M14600789
Price: 28.80 €
VHF-ANT...
VHF-ANTENNA, PACIFIC, PRO-RANGE, 2,5 m, S/S

Pacific 6123. Specifications: Frequency- VHF 156-162 MHz; Radome- Ultraglass; Ferrule- Stainless Steel; Antenna Type- Half wave; Gain- 3 dB; "Marine Gain"- 6 dB; Typical VSWR at 156.8 MHz- 1.2:1; DC Meter Reading- Open Circuit; Height- 2,5 m. Suitable mount on the M14600794 (Pacific 6159) or M14600795 (Pacific 6166), these mounts have 5 m of cable and FastFit plugs.

M14600752
Price: 58.80 €
VHF-ANT...
VHF-ANTENNA, PACIFIC, PRO-RANGE, 1,8 m, S/S

Pacific 6121. Specifications: Frequency- VHF 156-162 MHz; Radome- Ultraglass; Ferrule- Stainless Steel; Antenna Type- Half wave; Gain- 3 dB; "Marine Gain"- 6 dB; Typical VSWR at 156.8 MHz- 1.2:1; DC Meter Reading- Open Circuit; Height- 1,8 m. Suitable mount on the M14600794 (Pacific 6159) or M14600795 (Pacific 6166), these mounts have 5 m of cable and FastFit plugs.

M14600750
Price: 52.80 €
VHF-ANT...
VHF-ANTENNA, PACIFIC, PRO-RANGE, 2,5 m

Pacific 6102. Specifications: Frequency- VHF 156-162 MHz; Radome- Ultraglass; Ferrule- Nylon; Antenna Type- Half wave; Gain- 3 dB; "Marine Gain"- 6 dB; Typical VSWR at 156.8 MHz- 1.2:1; DC Meter Reading- Open Circuit; Height- 2,5 m. Suitable mount on the M14600790 (Pacific 6111), M14600791 (Pacific 6113) or M14600793 (Pacific 6115), these mounts have 5 m of cable and FastFit plugs.

M14600746
Price: 44.80 €
VHF-ANT...
VHF-ANTENNA, PACIFIC, PRO-RANGE, 1,8 m

Pacific 6101. Specifications: Frequency- VHF 156-162 MHz; Radome- Ultraglass; Ferrule- Nylon; Antenna Type- Half wave; Gain- 3dBi; "Marine Gain"- 6dB; Typical VSWR at 156.8 MHz- 1.2:1; DC Meter Reading- Open Circuit; Height- 1,8 m. Mount on the M14600790 (Pacific 6111), M14600791 (Pacific 6113) or M14600793 (Pacific 6115), these mounts have 5m of cable and FastFit plugs.

M14600744
Price: 43.80 €
VHF-ANT...
VHF-ANTENNA, PACIFIC, PRO-RANGE, 1,0 m

Pacific 6182. Specifications: Frequency- VHF 156-162 MHz; Radome- Ultraglass; Ferrule- Nylon; Antenna Type- Half wave; Gain- 3 dB; Marine Gain- 6 dB; Typical VSWR at 156.8 MHz- 1.2:1; DC Meter Reading- Open Circuit; Height- 1,0 m. Suitable mount on the M14600790 (Pacific 6111), M14600791 (Pacific 6113), M14600793 (Pacific 6115) or M14600792 (Pacific 6168), these mounts have 5 m of cable and FastFit plugs.

M14600742
Price: 31.80 €
ANCHOR ...
ANCHOR ADMIRALTY, 15 kg

Hot galvanized steel Admirality anchor with foldable arm for better stowage. Weight: 15 kg.

01.114.15
Price: 119.80 €
ANCHOR ...
ANCHOR ADMIRALTY, 10 kg

Hot galvanized steel Admirality anchor with foldable arm for better stowage. Weight: 10 kg.

01.114.10
Price: 76.66 €
ANCHOR ...
ANCHOR ADMIRALTY, 5 kg

Hot galvanized steel Admirality anchor with foldable arm for better stowage. Weight: 5 kg.

01.114.05
Price: 41.15 €
ANCHOR ...
ANCHOR LINE REEL, 32 m, 25 mm

Anchor line solves the age-old problem. There's no need to "wrestle" with wet ropes. Anchor line is based on the same idea as all modern cargo handling and securing; durability, flexibility and substantially flat strap the usual rope to lower the weight. Anchor line consisting of a coil and a belt. The coil can be easily attached to pilot's console, the bulkhead, the door, railing, etc. The belt tensile strength of up to 2200 kg, which is equivalent to 10 - 12 mm rope. Flat belt takes up considerably less space than an equivalent amount rope. Ordinary rope absorbs it, except 1.5 - 2.5 liters water for every 50 m, anchor line not more than 2.5 dl. Anchor line can also be used to secure a boat, towing and rescue tasks. Anchor line length: 50 m and width: 25 mm.

M13055030
Price: 258.80 €
ANCHOR ...
ANCHOR LINE REEL, 32 m, 25 mm

Anchor line solves the age-old problem. There's no need to "wrestle" with wet ropes. Anchor line is based on the same idea as all modern cargo handling and securing; durability, flexibility and substantially flat strap the usual rope to lower the weight. Anchor line consisting of a coil and a belt. The coil can be easily attached to pilot's console, the bulkhead, the door, railing, etc. The belt tensile strength of up to 1500 kg, which is equivalent to 8 - 10 mm rope. Flat belt takes up considerably less space than an equivalent amount rope. Anchor line length: 32 m and width: 25 mm.

M13055037
Price: 88.80 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 2,78 mm, 12 x 18"

Edge mount Lenco trim tab kit, 12-Gauge Blades / 12-Volt Actuators. Dimensions: 12 x 18" (30,5 x 46 cm), Minimum transom height: 11" (27,9 cm), suitable for boats 26'- 36' (7,9 m -10,9 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 12 GA (2,78 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !

M19040728
Price: 909.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 12 x 12"

requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !

M19040726
Price: 837.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 12 x 9"

Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 12 x 9" (30,5 x 23 cm), Minimum transom height: 11" (27,9 cm), suitable for boats 14'- 18' (4,2 m -5,4 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !

M19040724
Price: 809.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 9 x 12"

Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 9 x 12" (23 x 30,5 cm), Minimum transom height: 13,5" (34,3 cm), suitable for boats 16'- 25' (4,9 m -7,6 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !

M19040722
Price: 775.00 €
MOUNT T...
MOUNT TRIM TAB KIT- LENCO, EDGE, 1,98 mm, 9 x 9"

Edge mount Lenco trim tab kit, 14-Gauge Blades / 12-Volt Actuators. Dimensions: 9 x 9" (23 x 23 cm), Minimum transom height: 13,5" (34,3 cm), suitable for boats 14'- 18' (4,2 m -5,4 m). Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 x 14 GA (1,98 mm) stainless steel standard finish blades; 2 x actuators with 6' (1.8 m) leads and Deutsch connectors, 2 x actuator extension wiring harnesses - 20’ (6.1 m) length; 2 x upper mounting brackets with gland seal; 2 x lower mounting brackets; all necessary stainless steel mounting hardware and installation manual. SWITCH PANEL NOT INCLUDED AND MUST ORDER SEPARATELY !

M19040720
Price: 740.00 €
HYDRAUL...
HYDRAULIC STEERING SYSTEM- ULTRAFLEX GOTECH, 115 HP

Hydraulic steering set for outboard engines below 115 HP. Includes ”bull horn” UC81-OBF cylinder installed fore (81 ccm), lightweight UP18 hydraulic pump (55 Bar) made of composite plastic with built-in check valves, high-pressure hydraulic hoses (length: 6 m) and the required amount of hydraulic oil. Steering movement is 4,5 rotations for full movement of cylinder. Maximum steering wheel diameeter: 508 mm.

M13200001
Price: 694.00 €
HYDRAUL...
HYDRAULIC STEERING SYSTEM- ULTRAFLEX HYCO OBF, 150 HP

Hydraulic steering set for outboard engines up to 150 HP. Includes UC94-OBF/1 system cylinder (94 ccm), lightweight UP20F hydraulic pump (70 Bar) with built-in valves for stoping oil to run back, 2 x 6 m high-pressure hydraulic hoses and 2 hose connectors, 2 l hydraulic oil. Steering movement is 4,7 rotations for full movement of cylinder.

M13200002
Price: 675.00 €
HYDRAUL...
HYDRAULIC STEERING SYSTEM- ULTRAFLEX NAUTECH, 300 HP

Hydraulic steering set for outboard engines up to 300 HP. Includes UC128-OBF1 system cylinder (120 ccm), lightweight UP25F hydraulic pump (70 Bar) with built-in valves for stoping oil to run back, 2 x 9 m high-pressure hydraulic hoses and 2 hose connectors, 2 l hydraulic oil. Steering movement is 4,8 rotations for full movement of cylinder.

45.283.01
Price: 1293.16 €
HYDRAUL...
HYDRAULIC STEERING SYSTEM- TELEFLEX BAYSTAR, 150 HP

Teleflex (USA) hydraulic steering set Baystar for outboard engines up to 150 HP. Includes HC4645H system cylinder, HH4514 hydraulic pump with built-in valves for stoping oil to run back, 2 x 6 m high-pressure hydraulic hoses HO5160 and 2 hose connectors, 2.5 l hydraulic oil HA5430.

USP-BAY150
Price: 930.10 €
HYDRAUL...
HYDRAULIC STEERING SYSTEM- TELEFLEX SEASTAR, 450 HP

Teleflex (USA) hydraulic steering set Seastar for outboard engines up to 450 HP. Includes HC5345-3 system cylinder, HH5271-3 hydraulic pump with built-in valves for stoping oil to run back, 2 x 6 m high-pressure hydraulic hoses HO5160 and 2 hose connectors, 2.5 l hydraulic oil HA5430.

USP-SEA450
Price: 1354.10 €
DIVIDER...
DIVIDER, SEAWATER RESISTANT, CHROMED, 180 mm
Traditional divider, heavy type, chromed and with mirror finish. Seawater resistant. Length: 180 mm, measurement range: 250 mm. Includes dividers pouch.
LMPN50
Price: 22.50 €
DIVIDER...
DIVIDER, ONE-HAND BRITISH STYLE, CHROMED, 190 mm
One-Hand divider, acc. British pattern. Chromed and with mirror finish. Seawater resistant. Length: 190 mm, measurement range: 200 mm. Includes dividers pouch.
LMPN56
Price: 26.00 €
NAVIGAT...
NAVIGATION SET , PLASTIC HOLDER
Blue portfolio with push button and two holes to hang up. Features different areas and a slide in pocket for the name on the front side. Filled with: Triangle, nautical square, sharpener, rubber, pencil, ballpen, divider
LMPN7050
Price: 68.50 €
SEXTANT...
SEXTANT- DAVIS SEXTANT MK III
Sextant for use by professional, amateur and student navigators alike. Full 7" (178 mm) arc, 4 sun shades, corrosion proof.
LMDA011
Price: 71.50 €
SEXTANT...
SEXTANT- MICROMASTER MARK 25 DE LUXE
Improved sextant for all purposes. Molded in high-impact grey plastic. Full 7" (178 mm) arc, 7 sun shades, 3-power telescope. Complete with carrying case and with LED-lighting.
LMDA025
Price: 302.00 €
 
1  2  3
 
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
Baltic Ropes Superwinch Chatham Gulf ExNC Watski Cobra Marine Igloo